Booting-DS509: Porovnání verzí

Z Wiki UnArt Slavičín
Skočit na navigaciSkočit na vyhledávání
(Nová stránka: U-Boot 1.3.3 (Oct 27 2009 - 11:23:00) CPU: 8533, Version: 1.1, (0x80340011) Core: E500, Version: 2.2, (0x80210022) Clock Configuration: CPU:1067 MHz, CCB: 534 MHz, ...)
 
Bez shrnutí editace
 
Řádek 1: Řádek 1:
 


U-Boot 1.3.3 (Oct 27 2009 - 11:23:00)
U-Boot 1.3.3 (Oct 27 2009 - 11:23:00)


CPU:  8533, Version: 1.1, (0x80340011)
CPU:  8533, Version: 1.1, (0x80340011)
Core:  E500, Version: 2.2, (0x80210022)
Core:  E500, Version: 2.2, (0x80210022)
Clock Configuration:
Clock Configuration:
  CPU:1067 MHz, CCB: 534 MHz,
        CPU:1067 MHz, CCB: 534 MHz,
  DDR: 267 MHz (534 MT/s data rate), LBC:  33 MHz
        DDR: 267 MHz (534 MT/s data rate), LBC:  33 MHz
L1:    D-cache 32 kB enabled
L1:    D-cache 32 kB enabled
  I-cache 32 kB enabled
        I-cache 32 kB enabled
I2C:  ready
I2C:  ready
DRAM:  Initializing
DRAM:  Initializing
DDR: 1024 MB
    DDR: 1024 MB
FLASH:  4 MB
FLASH:  4 MB
L2 cache 256KB: enabled
L2 cache 256KB: enabled
Using default environment
Using default environment


In:    serial
In:    serial
Out:  serial
Out:  serial
Err:  serial
Err:  serial


CPLD revision: 1.0
CPLD revision: 1.0
Synology Model: DS-509+
Synology Model: DS-509+
DRAM Type: DIMM
DRAM Type: DIMM
Fan Status: Good
Fan Status: Good


Net:  eTSEC0 [PRIME], eTSEC2
Net:  eTSEC0 [PRIME], eTSEC2
eTSEC0 in Reduce mode
eTSEC0 in Reduce mode
eTSEC2 in Reduce mode
eTSEC2 in Reduce mode
Press Ctrl+C to abort autoboot in 2 second
Press Ctrl+C to abort autoboot in 2 second
## Booting image at ffc00000 ...
## Booting image at ffc00000 ...
  Image Name:  Linux-2.6.24
    Image Name:  Linux-2.6.24
  Image Type:  PowerPC Linux Kernel Image (gzip compressed)
    Image Type:  PowerPC Linux Kernel Image (gzip compressed)
  Data Size:    2011556 Bytes =  1.9 MB
    Data Size:    2011556 Bytes =  1.9 MB
  Load Address: 00000000
    Load Address: 00000000
  Entry Point:  00000000
    Entry Point:  00000000
  Verifying Checksum ... OK
    Verifying Checksum ... OK
  Uncompressing Kernel Image ... OK
    Uncompressing Kernel Image ... OK
## Loading RAMDisk Image at ffe00000 ...
## Loading RAMDisk Image at ffe00000 ...
  Image Name:  synology_ppc853x_509+ 1157
    Image Name:  synology_ppc853x_509+ 1157
  Image Type:  PowerPC Linux RAMDisk Image (gzip compressed)
    Image Type:  PowerPC Linux RAMDisk Image (gzip compressed)
  Data Size:    967120 Bytes = 944.5 kB
    Data Size:    967120 Bytes = 944.5 kB
  Load Address: 00000000
    Load Address: 00000000
  Entry Point:  00000000
    Entry Point:  00000000
  Verifying Checksum ... OK
    Verifying Checksum ... OK
  Booting using the fdt at 0xfff90000
    Booting using the fdt at 0xfff90000
  Loading Ramdisk to 3feb1000, end 3ff9d1d0 ... OK
    Loading Ramdisk to 3feb1000, end 3ff9d1d0 ... OK
  Loading Device Tree to 007fa000, end 007fcfff ... OK
    Loading Device Tree to 007fa000, end 007fcfff ... OK
Using MPC8544 DS machine description
Using MPC8544 DS machine description
Memory CAM mapping: CAM0=256Mb, CAM1=256Mb, CAM2=256Mb, CAM3=256Mb, residual: 0Mb
Memory CAM mapping: CAM0=256Mb, CAM1=256Mb, CAM2=256Mb, CAM3=256Mb, residual: 0Mb
Linux version 2.6.24 (root@image13) (gcc version 3.4.3 20041021 (prerelease)) #1157 Mon Apr 19 21:31:45 CST 2010
Linux version 2.6.24 (root@image13) (gcc version 3.4.3 20041021 (prerelease)) #1157 Mon Apr 19 21:31:45 CST 2010
Synology Hardware Version: DS509p-j
Synology Hardware Version: DS509p-j
Found initrd at 0xdfeb1000:0xdff9d1d0
Found initrd at 0xdfeb1000:0xdff9d1d0
Found FSL PCI host bridge at 0x00000000e0008000.Firmware bus number: 0->255
Found FSL PCI host bridge at 0x00000000e0008000.Firmware bus number: 0->255
Found FSL PCI host bridge at 0x00000000e000a000.Firmware bus number: 0->255
Found FSL PCI host bridge at 0x00000000e000a000.Firmware bus number: 0->255
Found FSL PCI host bridge at 0x00000000e0009000.Firmware bus number: 0->255
Found FSL PCI host bridge at 0x00000000e0009000.Firmware bus number: 0->255
MPC85xx DS board from Freescale Semiconductor
MPC85xx DS board from Freescale Semiconductor
Zone PFN ranges:
Zone PFN ranges:
  DMA            0 ->  262144
  DMA            0 ->  262144
  Normal    262144 ->  262144
  Normal    262144 ->  262144
Movable zone start PFN for each node
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
early_node_map[1] active PFN ranges
0:        0 ->  262144
    0:        0 ->  262144
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260096
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260096
Kernel command line: console=ttyS0,115200 ip=off initrd=0x00800000,4M root=/dev/md0 rw syno_hw_version=DS509p ihd_num=0
Kernel command line: console=ttyS0,115200 ip=off initrd=0x00800000,4M root=/dev/md0 rw syno_hw_version=DS509p ihd_num=0
mpic: Setting up MPIC " OpenPIC  " version 1.2 at e0040000, max 1 CPUs
mpic: Setting up MPIC " OpenPIC  " version 1.2 at e0040000, max 1 CPUs
mpic: ISU size: 80, shift: 7, mask: 7f
mpic: ISU size: 80, shift: 7, mask: 7f
mpic: Initializing for 80 sources
mpic: Initializing for 80 sources
PID hash table entries: 4096 (order: 12, 16384 bytes)
PID hash table entries: 4096 (order: 12, 16384 bytes)
clocksource: timebase mult[3c01894] shift[22] registered
clocksource: timebase mult[3c01894] shift[22] registered
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1033856k/1048576k available (3888k kernel code, 14396k reserved, 136k data, 371k bss, 160k init)
Memory: 1033856k/1048576k available (3888k kernel code, 14396k reserved, 136k data, 371k bss, 160k init)
Mount-cache hash table entries: 512
Mount-cache hash table entries: 512
net_namespace: 64 bytes
net_namespace: 64 bytes
xor: measuring software checksum speed
xor: measuring software checksum speed
  8regs    :  1244.000 MB/sec
    8regs    :  1244.000 MB/sec
  8regs_prefetch:  1080.000 MB/sec
    8regs_prefetch:  1080.000 MB/sec
  32regs    :  1336.000 MB/sec
    32regs    :  1336.000 MB/sec
  32regs_prefetch:  1188.000 MB/sec
    32regs_prefetch:  1188.000 MB/sec
xor: using function: 32regs (1336.000 MB/sec)
xor: using function: 32regs (1336.000 MB/sec)
NET: Registered protocol family 16
NET: Registered protocol family 16
rstcr compatible register does not exist!
rstcr compatible register does not exist!
PCI: Probing PCI hardware
PCI: Probing PCI hardware
PCI: 0001:01:00.0: class b20 doesn't match header type 01. Ignoring class.
PCI: 0001:01:00.0: class b20 doesn't match header type 01. Ignoring class.
PCI: Transparent bridge - 0001:01:00.0
PCI: Transparent bridge - 0001:01:00.0
PCI: 0002:03:00.0: class b20 doesn't match header type 01. Ignoring class.
PCI: 0002:03:00.0: class b20 doesn't match header type 01. Ignoring class.
PCI: Transparent bridge - 0002:03:00.0
PCI: Transparent bridge - 0002:03:00.0
SCSI subsystem initialized
SCSI subsystem initialized
NET: Registered protocol family 2
NET: Registered protocol family 2
Time: timebase clocksource has been installed.
Time: timebase clocksource has been installed.
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
TCP reno registered
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 944k freed
Freeing initrd memory: 944k freed
VFS: Disk quotas dquot_6.5.1
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
async_tx: api initialized (async)
async_tx: api initialized (async)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler deadline registered
io scheduler cfq registered
io scheduler cfq registered
Serial: 8250/16550 driver $Revision: 1.5 $ 4 ports, IRQ sharing enabled
Serial: 8250/16550 driver $Revision: 1.5 $ 4 ports, IRQ sharing enabled
serial8250.0: ttyS0 at MMIO 0xe0004500 (irq = 42) is a 16550A
serial8250.0: ttyS0 at MMIO 0xe0004500 (irq = 42) is a 16550A
console [ttyS0] enabled
console [ttyS0] enabled
serial8250.0: ttyS1 at MMIO 0xe0004600 (irq = 42) is a 16550A
serial8250.0: ttyS1 at MMIO 0xe0004600 (irq = 42) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
loop: module loaded
loop: module loaded
e1000e: Intel(R) PRO/1000 Network Driver - 0.2.0
e1000e: Intel(R) PRO/1000 Network Driver - 0.2.0
e1000e: Copyright (c) 1999-2007 Intel Corporation.
e1000e: Copyright (c) 1999-2007 Intel Corporation.
Gianfar MII Bus: probed
Gianfar MII Bus: probed
eth0: Gianfar Ethernet Controller Version 1.3-skbr, 00:00:00:00:00:00
eth0: Gianfar Ethernet Controller Version 1.3-skbr, 00:00:00:00:00:00
GFAR: SKB Handler initialized at CPU#0(max=128)
GFAR: SKB Handler initialized at CPU#0(max=128)
eth0: MTU = 1500 (frame size=1514, truesize=1800)
eth0: MTU = 1500 (frame size=1514, truesize=1800)
eth0: Running with NAPI enabled
eth0: Running with NAPI enabled
eth0: 64/64 RX/TX BD ring size
eth0: 64/64 RX/TX BD ring size
eth1: Gianfar Ethernet Controller Version 1.3-skbr, 00:00:00:00:00:00
eth1: Gianfar Ethernet Controller Version 1.3-skbr, 00:00:00:00:00:00
GFAR: SKB Handler initialized at CPU#0(max=128)
GFAR: SKB Handler initialized at CPU#0(max=128)
eth1: MTU = 1500 (frame size=1514, truesize=1800)
eth1: MTU = 1500 (frame size=1514, truesize=1800)
eth1: Running with NAPI enabled
eth1: Running with NAPI enabled
eth1: 64/64 RX/TX BD ring size
eth1: 64/64 RX/TX BD ring size
patch with: gianfar: Fix skb allocation strategy
patch with: gianfar: Fix skb allocation strategy
Driver 'sd' needs updating - please use bus_type methods
Driver 'sd' needs updating - please use bus_type methods
scsi0 : Marvell SCSI to SATA adapter
scsi0 : Marvell SCSI to SATA adapter
scsi1 : Marvell SCSI to SATA adapter
scsi1 : Marvell SCSI to SATA adapter
scsi2 : Marvell SCSI to SATA adapter
scsi2 : Marvell SCSI to SATA adapter
scsi3 : Marvell SCSI to SATA adapter
scsi3 : Marvell SCSI to SATA adapter
scsi 3:0:0:0: Direct-Access    Seagate  ST31000528AS    CC38 PQ: 0 ANSI: 5
scsi 3:0:0:0: Direct-Access    Seagate  ST31000528AS    CC38 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdd] 1953525168 512-byte hardware sectors (1000205 MB)
sd 3:0:0:0: [sdd] 1953525168 512-byte hardware sectors (1000205 MB)
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 3:0:0:0: [sdd] 1953525168 512-byte hardware sectors (1000205 MB)
sd 3:0:0:0: [sdd] 1953525168 512-byte hardware sectors (1000205 MB)
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
sdd: sdd1 sdd2
  sdd: sdd1 sdd2
sd 3:0:0:0: [sdd] Attached SCSI disk
sd 3:0:0:0: [sdd] Attached SCSI disk
scsi4 : sata_sil24
scsi4 : sata_sil24
scsi5 : sata_sil24
scsi5 : sata_sil24
ata1: SATA max UDMA/100 host m128@0x80000000 port 0x80004000 irq 16
ata1: SATA max UDMA/100 host m128@0x80000000 port 0x80004000 irq 16
ata2: SATA max UDMA/100 host m128@0x80000000 port 0x80006000 irq 16
ata2: SATA max UDMA/100 host m128@0x80000000 port 0x80006000 irq 16
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
ata1.00: ATA-8: ST31000528AS, CC38, max UDMA/133
ata1.00: ATA-8: ST31000528AS, CC38, max UDMA/133
ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/100
ata1.00: configured for UDMA/100
ata2: SATA link down (SStatus 0 SControl 0)
ata2: SATA link down (SStatus 0 SControl 0)
scsi 4:0:0:0: Direct-Access    ATA      ST31000528AS    CC38 PQ: 0 ANSI: 5
scsi 4:0:0:0: Direct-Access    ATA      ST31000528AS    CC38 PQ: 0 ANSI: 5
sd 4:0:0:0: [sde] 1953525168 512-byte hardware sectors (1000205 MB)
sd 4:0:0:0: [sde] 1953525168 512-byte hardware sectors (1000205 MB)
sd 4:0:0:0: [sde] Write Protect is off
sd 4:0:0:0: [sde] Write Protect is off
sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sde] 1953525168 512-byte hardware sectors (1000205 MB)
sd 4:0:0:0: [sde] 1953525168 512-byte hardware sectors (1000205 MB)
sd 4:0:0:0: [sde] Write Protect is off
sd 4:0:0:0: [sde] Write Protect is off
sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sde: sde1 sde2
  sde: sde1 sde2
sd 4:0:0:0: [sde] Attached SCSI disk
sd 4:0:0:0: [sde] Attached SCSI disk
physmap platform flash device: 00400000 at ffc00000
physmap platform flash device: 00400000 at ffc00000
SYNOMTD-0: Found 1 x8 devices at 0x0 in 8-bit bank
SYNOMTD-0: Found 1 x8 devices at 0x0 in 8-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
  Amd/Fujitsu Extended Query Table at 0x0040
SYNOMTD-0: Swapping erase regions for broken CFI table.
SYNOMTD-0: Swapping erase regions for broken CFI table.
number of CFI chips: 1
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Searching for RedBoot partition table in SYNOMTD-0 at offset 0x3b0000
Searching for RedBoot partition table in SYNOMTD-0 at offset 0x3b0000
6 RedBoot partitions found on MTD device SYNOMTD-0
6 RedBoot partitions found on MTD device SYNOMTD-0
SYNOMTD flash bank 0: Using RedBoot partition definition
SYNOMTD flash bank 0: Using RedBoot partition definition
Creating 6 MTD partitions on "SYNOMTD-0":
Creating 6 MTD partitions on "SYNOMTD-0":
0x003c0000-0x00400000 : "RedBoot"
0x003c0000-0x00400000 : "RedBoot"
0x00000000-0x00200000 : "zImage"
0x00000000-0x00200000 : "zImage"
0x00200000-0x00380000 : "rd.gz"
0x00200000-0x00380000 : "rd.gz"
0x00380000-0x00390000 : "vendor"
0x00380000-0x00390000 : "vendor"
Serial Number: 9BFDN00719
Serial Number: 9BFDN00719
0x00390000-0x003b0000 : "RedBoot Config"
0x00390000-0x003b0000 : "RedBoot Config"
0x003b0000-0x003c0000 : "FIS directory"
0x003b0000-0x003c0000 : "FIS directory"
i2c /dev entries driver
i2c /dev entries driver
md: linear personality registered for level -1
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid10 personality registered for level 10
raid6: int32x1    164 MB/s
raid6: int32x1    164 MB/s
raid6: int32x2    285 MB/s
raid6: int32x2    285 MB/s
raid6: int32x4    375 MB/s
raid6: int32x4    375 MB/s
raid6: int32x8    300 MB/s
raid6: int32x8    300 MB/s
raid6: using algorithm int32x4 (375 MB/s)
raid6: using algorithm int32x4 (375 MB/s)
md: raid6 personality registered for level 6
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: raid4 personality registered for level 4
device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
t23xrm: no compatible entry in device tree, exiting
t23xrm: no compatible entry in device tree, exiting
TCP cubic registered
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp transport module.
md: Autodetecting RAID arrays.
md: Autodetecting RAID arrays.
md: Scanned 4 and added 4 devices.
md: Scanned 4 and added 4 devices.
md: autorun ...
md: autorun ...
md: considering sdd1 ...
md: considering sdd1 ...
md:  adding sdd1 ...
md:  adding sdd1 ...
md: sdd2 has different UUID to sdd1
md: sdd2 has different UUID to sdd1
md:  adding sde1 ...
md:  adding sde1 ...
md: sde2 has different UUID to sdd1
md: sde2 has different UUID to sdd1
md: created md0
md: created md0
md: bind<sde1>
md: bind<sde1>
md: bind<sdd1>
md: bind<sdd1>
md: running: <sdd1><sde1>
md: running: <sdd1><sde1>
md: md0: set sdd1 to auto_remap [0]
md: md0: set sdd1 to auto_remap [0]
md: md0: set sde1 to auto_remap [0]
md: md0: set sde1 to auto_remap [0]
raid1: raid set md0 active with 2 out of 5 mirrors
raid1: raid set md0 active with 2 out of 5 mirrors
md: considering sdd2 ...
md: considering sdd2 ...
md:  adding sdd2 ...
md:  adding sdd2 ...
md:  adding sde2 ...
md:  adding sde2 ...
md: created md1
md: created md1
md: bind<sde2>
md: bind<sde2>
md: bind<sdd2>
md: bind<sdd2>
md: running: <sdd2><sde2>
md: running: <sdd2><sde2>
md: md1: set sdd2 to auto_remap [0]
md: md1: set sdd2 to auto_remap [0]
md: md1: set sde2 to auto_remap [0]
md: md1: set sde2 to auto_remap [0]
raid1: raid set md1 active with 2 out of 5 mirrors
raid1: raid set md1 active with 2 out of 5 mirrors
md: ... autorun DONE.
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
VFS: Mounted root (ext2 filesystem).
START /linuxrc.syno
START /linuxrc.syno
ds508_synobios: module license 'Synology Inc.' taints kernel.
ds508_synobios: module license 'Synology Inc.' taints kernel.
synobios: load, major number 201
synobios: load, major number 201
Brand: Synology
Brand: Synology
Model: DS-509+
Model: DS-509+
Starting /usr/syno/bin/synocfgen...
Starting /usr/syno/bin/synocfgen...
/usr/syno/bin/synocfgen returns 0
/usr/syno/bin/synocfgen returns 0
synobios: unload
synobios: unload
Partition Version=0
Partition Version=0
Partition layout is not DiskStation style.
Partition layout is not DiskStation style.
NOT EXECUTE /sbin/fsck.ext3.
NOT EXECUTE /sbin/fsck.ext3.
Mounting /dev/md0 /tmpRoot
Mounting /dev/md0 /tmpRoot
kjournald starting.  Commit interval 5 seconds
kjournald starting.  Commit interval 5 seconds
EXT3 FS on md0, internal journal
EXT3 FS on md0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
EXT3-fs: mounted filesystem with ordered data mode.
------------upgrade
------------upgrade
use default /dev/md0
use default /dev/md0
Begin upgrade procedure
Begin upgrade procedure
No upgrade file exists
No upgrade file exists
End upgrade procedure
End upgrade procedure
============upgrade
============upgrade
/dev/md0 /tmpRoot ext3 rw,data=ordered 0 0
/dev/md0 /tmpRoot ext3 rw,data=ordered 0 0
none /sys sysfs rw 0 0
none /sys sysfs rw 0 0


linuxrc.syno executed successfully.
linuxrc.syno executed successfully.
kjournald starting.  Commit interval 5 seconds
kjournald starting.  Commit interval 5 seconds
EXT3 FS on md0, internal journal
EXT3 FS on md0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem).
VFS: Mounted root (ext3 filesystem).
Trying to move old root to /initrd ... okay
Trying to move old root to /initrd ... okay
Freeing unused kernel memory: 160k init
Freeing unused kernel memory: 160k init
Starting /etc/rc ...
Starting /etc/rc ...
Mounting proc filesystem...
Mounting proc filesystem...
Check new disk...
Check new disk...
Not new disk. Do nothing.
Not new disk. Do nothing.
Adding 522040k swap on /dev/md1.  Priority:-1 extents:1 across:522040k
Adding 522040k swap on /dev/md1.  Priority:-1 extents:1 across:522040k
/dev/md0 on / type ext3 (rw,data=ordered)
/dev/md0 on / type ext3 (rw,data=ordered)
/tmp on /tmp type tmpfs (rw)
/tmp on /tmp type tmpfs (rw)
Hostname synology-dulik
Hostname synology-dulik
195.113.96.122 synology-dulik
195.113.96.122 synology-dulik
169.254.34.204 synology-dulik
169.254.34.204 synology-dulik
Load llc.ko...  
Load llc.ko...  
Load psnap.ko...  
Load psnap.ko...  
Load appletalk.ko...  
Load appletalk.ko...  
NET: Registered protocol family 5
NET: Registered protocol family 5
Load fat.ko...  
Load fat.ko...  
Load vfat.ko...  
Load vfat.ko...  
Load ntfs.ko...  
Load ntfs.ko...  
NTFS driver 2.1.29 [Flags: R/O MODULE].
NTFS driver 2.1.29 [Flags: R/O MODULE].
Load sg.ko...  
Load sg.ko...  
sd 3:0:0:0: Attached scsi generic sg0 type 0
sd 3:0:0:0: Attached scsi generic sg0 type 0
sd 4:0:0:0: Attached scsi generic sg1 type 0
sd 4:0:0:0: Attached scsi generic sg1 type 0
Load usbcore.ko...  
Load usbcore.ko...  
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new device driver usb
Load quota_v2.ko...  
Load quota_v2.ko...  
Load soundcore.ko...  
Load soundcore.ko...  
Load snd-page-alloc.ko...  
Load snd-page-alloc.ko...  
Load snd.ko...  
Load snd.ko...  
Load snd-seq-device.ko...  
Load snd-seq-device.ko...  
Load snd-rawmidi.ko...  
Load snd-rawmidi.ko...  
Load snd-usb-lib.ko...  
Load snd-usb-lib.ko...  
Load snd-hwdep.ko...  
Load snd-hwdep.ko...  
Load snd-timer.ko...  
Load snd-timer.ko...  
Load snd-pcm.ko...  
Load snd-pcm.ko...  
Load snd-usb-audio.ko...  
Load snd-usb-audio.ko...  
usbcore: registered new interface driver snd-usb-audio
usbcore: registered new interface driver snd-usb-audio
Load snd-mixer-oss.ko...  
Load snd-mixer-oss.ko...  
Load snd-pcm-oss.ko...  
Load snd-pcm-oss.ko...  
Load slhc.ko...  
Load slhc.ko...  
Load ppp_generic.ko...  
Load ppp_generic.ko...  
PPP generic driver version 2.4.2
PPP generic driver version 2.4.2
Load crc-ccitt.ko...  
Load crc-ccitt.ko...  
Load ppp_async.ko...  
Load ppp_async.ko...  
Load exportfs.ko...  
Load exportfs.ko...  
Load nfsd.ko...  
Load nfsd.ko...  
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Load fuse.ko...  
Load fuse.ko...  
fuse init (API version 7.9)
fuse init (API version 7.9)
Load zlib_inflate.ko...  
Load zlib_inflate.ko...  
Load udf.ko...  
Load udf.ko...  
Load isofs.ko...  
Load isofs.ko...  
Load ecryptfs.ko...  
Load ecryptfs.ko...  
encryptfs using the OCF package.
encryptfs using the OCF package.
Mounting sysfs...
Mounting sysfs...
Mounting usbfs...
Mounting usbfs...
Load synobios....
Load synobios....
synobios: load, major number 201
synobios: load, major number 201
Brand: Synology
Brand: Synology
Model: DS-509+
Model: DS-509+
mknod: synobios: File exists
mknod: synobios: File exists


dhcpcd[1904]: dhcpReboot: do not want cache
dhcpcd[1904]: dhcpReboot: do not want cache




dhcpcd[1911]: dhcpReboot: do not want cache
dhcpcd[1911]: dhcpReboot: do not want cache




eth0      Link encap:Ethernet  HWaddr 00:11:32:05:AF:06   
eth0      Link encap:Ethernet  HWaddr 00:11:32:05:AF:06   
  inet addr:169.254.163.109  Bcast:169.254.255.255  Mask:255.255.0.0
          inet addr:169.254.163.109  Bcast:169.254.255.255  Mask:255.255.0.0
  UP BROADCAST NOTRAILERS MULTICAST  MTU:1500  Metric:1
          UP BROADCAST NOTRAILERS MULTICAST  MTU:1500  Metric:1
  RX packets:0 errors:0 dropped:0 overruns:0 frame:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:1
  TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
          TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
  collisions:0 txqueuelen:1000  
          collisions:0 txqueuelen:1000  
  RX bytes:0 (0.0 B)  TX bytes:890 (890.0 B)
          RX bytes:0 (0.0 B)  TX bytes:890 (890.0 B)
  Base address:0x6000  
          Base address:0x6000  


eth1      Link encap:Ethernet  HWaddr 00:11:32:05:AF:07   
eth1      Link encap:Ethernet  HWaddr 00:11:32:05:AF:07   
  inet addr:169.254.209.121  Bcast:169.254.255.255  Mask:255.255.0.0
          inet addr:169.254.209.121  Bcast:169.254.255.255  Mask:255.255.0.0
  UP BROADCAST NOTRAILERS RUNNING MULTICAST  MTU:1500  Metric:1
          UP BROADCAST NOTRAILERS RUNNING MULTICAST  MTU:1500  Metric:1
  RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
  TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
          TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
  collisions:0 txqueuelen:1000  
          collisions:0 txqueuelen:1000  
  RX bytes:0 (0.0 B)  TX bytes:890 (890.0 B)
          RX bytes:0 (0.0 B)  TX bytes:890 (890.0 B)
  Base address:0x8000  
          Base address:0x8000  


lo        Link encap:Local Loopback   
lo        Link encap:Local Loopback   
  inet addr:127.0.0.1  Mask:255.0.0.0
          inet addr:127.0.0.1  Mask:255.0.0.0
  UP LOOPBACK RUNNING  MTU:16436  Metric:1
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
  RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
  TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
  collisions:0 txqueuelen:0  
          collisions:0 txqueuelen:0  
  RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)


Add default router 195.113.96.1
Add default router 195.113.96.1
ip: RTNETLINK answers: Network is unreachable
ip: RTNETLINK answers: Network is unreachable
kernel.panic = 3
kernel.panic = 3
Starting syslogd...
Starting syslogd...
Pass s00_synocheckfstab ...
Pass s00_synocheckfstab ...
Pass CheckSynoinfo ...
Pass CheckSynoinfo ...
Pass CheckUser
Pass CheckUser
Pass CheckSmbConf ...
Pass CheckSmbConf ...
Pass CheckCronTab ...
Pass CheckCronTab ...
Pass CheckGroup.
Pass CheckGroup.
Pass s62_synocheckapple ...
Pass s62_synocheckapple ...
Checking and Mounting filesystem(s) ...
Checking and Mounting filesystem(s) ...
start findhostd
start findhostd
synokerneltz: set kernel time zone to -60
synokerneltz: set kernel time zone to -60
kernel.core_pattern = /volume1/@%e.core
kernel.core_pattern = /volume1/@%e.core
fs.suid_dumpable = 2
fs.suid_dumpable = 2
vm.min_free_kbytes = 8192
vm.min_free_kbytes = 8192
Starting scemd ...
Starting scemd ...
PHY: e0024520:01 - Link is Up - 1000/Full
PHY: e0024520:01 - Link is Up - 1000/Full
ata1.00: configured for UDMA/100
ata1.00: configured for UDMA/100
ata1: EH complete
ata1: EH complete
sd 4:0:0:0: [sde] 1953525168 512-byte hardware sectors (1000205 MB)
sd 4:0:0:0: [sde] 1953525168 512-byte hardware sectors (1000205 MB)
sd 4:0:0:0: [sde] Write Protect is off
sd 4:0:0:0: [sde] Write Protect is off
sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
No rules exists, remove firewall modules...
No rules exists, remove firewall modules...
Firewall modules has not been started...
Firewall modules has not been started...
Starting Hotplug Handling Daemon ...
Starting Hotplug Handling Daemon ...


Disk Usage Status:  
  Disk Usage Status:  
[sdd] [sde]  
    [sdd] [sde]  
--------------------------------
  --------------------------------
[md0]:  [1]  [1]   
  [md0]:  [1]  [1]   
[md1]:  [1]  [1]   
  [md1]:  [1]  [1]   
Partition Layout Version:   
  Partition Layout Version:   
/dev/sdd: [V2]  
/dev/sdd: [V2]  
/dev/sde: [V2]  
/dev/sde: [V2]  
synocheckvolume: Pass  
synocheckvolume: Pass  
synocheckshare: Pass SYNOICheckShare()
synocheckshare: Pass SYNOICheckShare()
synocheckshare: Pass SYNOICheckShareExt()
synocheckshare: Pass SYNOICheckShareExt()
synocheckshare: Pass SYNOICheckServiceLink()
synocheckshare: Pass SYNOICheckServiceLink()
synocheckshare: Pass SYNOICheckAutoDecrypt()
synocheckshare: Pass SYNOICheckAutoDecrypt()
synocheckiscsitrg: Pass  
synocheckiscsitrg: Pass  
synobootup: BEGIN
synobootup: BEGIN
synobootup: END
synobootup: END
Starting inetd...
Starting inetd...
Starting crond...
Starting crond...
Starting PostgreSQL...
Starting PostgreSQL...
warning: cannot change to home directory
warning: cannot change to home directory
LOG:  could not create unrecognized address family 10 socket: Address family not supported by protocol
LOG:  could not create unrecognized address family 10 socket: Address family not supported by protocol
LOG:  database system was shut down at 2010-07-20 15:00:05 CEST
LOG:  database system was shut down at 2010-07-20 15:00:05 CEST
FATAL:  the database system is starting up
FATAL:  the database system is starting up
LOG:  database system is ready to accept connections
LOG:  database system is ready to accept connections
Update blog_config table in blog db where config_id = 0 to test blog db existence
Update blog_config table in blog db where config_id = 0 to test blog db existence
FATAL:  database "blog" does not exist
FATAL:  database "blog" does not exist
Update photo log table where log id = 0 to test db existence
Update photo log table where log id = 0 to test db existence
warning: cannot change to home directory
warning: cannot change to home directory
UPDATE 0
UPDATE 0
Update blog_config table in photo db where config_id = 0 to test blog tables existence
Update blog_config table in photo db where config_id = 0 to test blog tables existence
warning: cannot change to home directory
warning: cannot change to home directory
UPDATE 0
UPDATE 0
0
0
ERROR:  relation "photo_access_right_bak" does not exist
ERROR:  relation "photo_access_right_bak" does not exist
STATEMENT:  ALTER TABLE photo_access_right_bak OWNER TO admin;
STATEMENT:  ALTER TABLE photo_access_right_bak OWNER TO admin;
photo_access_right_bak check OK.
photo_access_right_bak check OK.
ERROR:  relation "photo_comment_bak" does not exist
ERROR:  relation "photo_comment_bak" does not exist
STATEMENT:  ALTER TABLE photo_comment_bak OWNER TO admin;
STATEMENT:  ALTER TABLE photo_comment_bak OWNER TO admin;
photo_comment_bak check OK.
photo_comment_bak check OK.
ERROR:  relation "photo_config_bak" does not exist
ERROR:  relation "photo_config_bak" does not exist
STATEMENT:  ALTER TABLE photo_config_bak OWNER TO admin;
STATEMENT:  ALTER TABLE photo_config_bak OWNER TO admin;
photo_config_bak check OK.
photo_config_bak check OK.
ERROR:  relation "photo_image_bak" does not exist
ERROR:  relation "photo_image_bak" does not exist
STATEMENT:  ALTER TABLE photo_image_bak OWNER TO admin;
STATEMENT:  ALTER TABLE photo_image_bak OWNER TO admin;
photo_image_bak check OK.
photo_image_bak check OK.
ERROR:  relation "photo_log_bak" does not exist
ERROR:  relation "photo_log_bak" does not exist
STATEMENT:  ALTER TABLE photo_log_bak OWNER TO admin;
STATEMENT:  ALTER TABLE photo_log_bak OWNER TO admin;
photo_log_bak check OK.
photo_log_bak check OK.
ERROR:  relation "photo_share_bak" does not exist
ERROR:  relation "photo_share_bak" does not exist
STATEMENT:  ALTER TABLE photo_share_bak OWNER TO admin;
STATEMENT:  ALTER TABLE photo_share_bak OWNER TO admin;
photo_share_bak check OK.
photo_share_bak check OK.
ERROR:  relation "photo_upload_right_bak" does not exist
ERROR:  relation "photo_upload_right_bak" does not exist
STATEMENT:  ALTER TABLE photo_upload_right_bak OWNER TO admin;
STATEMENT:  ALTER TABLE photo_upload_right_bak OWNER TO admin;
photo_upload_right_bak check OK.
photo_upload_right_bak check OK.
ERROR:  relation "photo_user_bak" does not exist
ERROR:  relation "photo_user_bak" does not exist
STATEMENT:  ALTER TABLE photo_user_bak OWNER TO admin;
STATEMENT:  ALTER TABLE photo_user_bak OWNER TO admin;
photo_user_bak check OK.
photo_user_bak check OK.
ERROR:  relation "video_comment_bak" does not exist
ERROR:  relation "video_comment_bak" does not exist
STATEMENT:  ALTER TABLE video_comment_bak OWNER TO admin;
STATEMENT:  ALTER TABLE video_comment_bak OWNER TO admin;
video_comment_bak check OK.
video_comment_bak check OK.
ERROR:  relation "video_desc_bak" does not exist
ERROR:  relation "video_desc_bak" does not exist
STATEMENT:  ALTER TABLE video_desc_bak OWNER TO admin;
STATEMENT:  ALTER TABLE video_desc_bak OWNER TO admin;
video_desc_bak check OK.
video_desc_bak check OK.
Update photoImage table to test new table existence
Update photoImage table to test new table existence
warning: cannot change to home directory
warning: cannot change to home directory
UPDATE 0
UPDATE 0
Update email in photo_user table to test email existence
Update email in photo_user table to test email existence
warning: cannot change to home directory
warning: cannot change to home directory
UPDATE 0
UPDATE 0
Update version in photo_image table to test version existence
Update version in photo_image table to test version existence
warning: cannot change to home directory
warning: cannot change to home directory
UPDATE 0
UPDATE 0
Update photo_config table in photo db where config_id = 0 to test photo_config table existence
Update photo_config table in photo db where config_id = 0 to test photo_config table existence
warning: cannot change to home directory
warning: cannot change to home directory
UPDATE 0
UPDATE 0
Update is_subdir in photo_share table to test new columns existence
Update is_subdir in photo_share table to test new columns existence
warning: cannot change to home directory
warning: cannot change to home directory
UPDATE 0
UPDATE 0
Update photo_upload_right table in photo db to test photo_upload_right table existence.
Update photo_upload_right table in photo db to test photo_upload_right table existence.
Update media type table where type id = 0 to test db existence
Update media type table where type id = 0 to test db existence
warning: cannot change to home directory
warning: cannot change to home directory
?column?  
  ?column?  
----------
----------
(0 rows)
(0 rows)


MySQL is not enabled. Skip...
MySQL is not enabled. Skip...
Checking synolog database existence...
Checking synolog database existence...
warning: cannot change to home directory
warning: cannot change to home directory
Checking synolog webfmxfer table existence...
Checking synolog webfmxfer table existence...
warning: cannot change to home directory
warning: cannot change to home directory
Checking if need to run synologd...
Checking if need to run synologd...
No need to start synologd...
No need to start synologd...
Download hasn't set its' volume, let user to choose...
Download hasn't set its' volume, let user to choose...
warning: cannot change to home directory
warning: cannot change to home directory
?column?  
  ?column?  
----------
----------
(0 rows)
(0 rows)


Update download queue table and set all pid to -1
Update download queue table and set all pid to -1
warning: cannot change to home directory
warning: cannot change to home directory
UPDATE 0
UPDATE 0
Update upload_rate in download_queue table to test upload_rate
Update upload_rate in download_queue table to test upload_rate
warning: cannot change to home directory
warning: cannot change to home directory
UPDATE 0
UPDATE 0
Update seeders in download_queue table to test seeders/leechers
Update seeders in download_queue table to test seeders/leechers
warning: cannot change to home directory
warning: cannot change to home directory
UPDATE 0
UPDATE 0
set torrent task_flags in download_queue
set torrent task_flags in download_queue
warning: cannot change to home directory
warning: cannot change to home directory
UPDATE 0
UPDATE 0
Check current amule version...
Check current amule version...
No need to upgrade amule.conf...
No need to upgrade amule.conf...
warning: cannot change to home directory
warning: cannot change to home directory
UPDATE 0
UPDATE 0
There is no printer. Skip lpd...
There is no printer. Skip lpd...
Starting Synology Indexing Daemon ...
Starting Synology Indexing Daemon ...
No iSCSI devices enabled, skip it...  
No iSCSI devices enabled, skip it...  
#####Remove Temp TDB#####
#####Remove Temp TDB#####
###Starting nmbd###
###Starting nmbd###


##################
##################
Starting Samba
  Starting Samba
##################
##################
#####Checking TDB /usr/syno/etc/private/secrets.tdb
#####Checking TDB /usr/syno/etc/private/secrets.tdb
backup tdb /usr/syno/etc/private/secrets.tdb
backup tdb /usr/syno/etc/private/secrets.tdb
#####Checking TDB /var/run/account_policy.tdb
#####Checking TDB /var/run/account_policy.tdb
backup tdb /var/run/account_policy.tdb
backup tdb /var/run/account_policy.tdb
#####Checking TDB /var/run/group_mapping.tdb
#####Checking TDB /var/run/group_mapping.tdb
#####Checking TDB /var/run/ntdrivers.tdb
#####Checking TDB /var/run/ntdrivers.tdb
backup tdb /var/run/ntdrivers.tdb
backup tdb /var/run/ntdrivers.tdb
#####Checking TDB /var/run/ntforms.tdb
#####Checking TDB /var/run/ntforms.tdb
backup tdb /var/run/ntforms.tdb
backup tdb /var/run/ntforms.tdb
#####Checking TDB /var/run/ntprinters.tdb
#####Checking TDB /var/run/ntprinters.tdb
backup tdb /var/run/ntprinters.tdb
backup tdb /var/run/ntprinters.tdb
#####Checking TDB /var/run/share_info.tdb
#####Checking TDB /var/run/share_info.tdb
#####Checking TDB /var/run/registry.tdb
#####Checking TDB /var/run/registry.tdb
backup tdb /var/run/registry.tdb
backup tdb /var/run/registry.tdb
Load ehci-hcd.ko...  
Load ehci-hcd.ko...  
ehci_hcd 0000:00:0e.1: EHCI Host Controller
ehci_hcd 0000:00:0e.1: EHCI Host Controller
ehci_hcd 0000:00:0e.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0e.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0e.1: irq 19, io mem 0xc0001000
ehci_hcd 0000:00:0e.1: irq 19, io mem 0xc0001000
ehci_hcd 0000:00:0e.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
ehci_hcd 0000:00:0e.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
hub 1-0:1.0: 3 ports detected
Load ohci-hcd.ko...  
Load ohci-hcd.ko...  
ohci_hcd 0000:00:0e.0: OHCI Host Controller
ohci_hcd 0000:00:0e.0: OHCI Host Controller
ohci_hcd 0000:00:0e.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:0e.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:0e.0: irq 19, io mem 0xc0000000
ohci_hcd 0000:00:0e.0: irq 19, io mem 0xc0000000
usb usb2: configuration #1 chosen from 1 choice
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
hub 2-0:1.0: 3 ports detected
Load uhci-hcd.ko...  
Load uhci-hcd.ko...  
USB Universal Host Controller Interface driver v3.0
USB Universal Host Controller Interface driver v3.0
Load usb-storage.ko...  
Load usb-storage.ko...  
Initializing USB Mass Storage driver...
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
USB Mass Storage support registered.
Load usblp.ko...  
Load usblp.ko...  
usbcore: registered new interface driver usblp
usbcore: registered new interface driver usblp
Load input-core.ko...  
Load input-core.ko...  
Load hid.ko...  
Load hid.ko...  
Load usbhid.ko...  
Load usbhid.ko...  
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Local package initialization:startup daemons
Local package initialization:startup daemons
.
.


done.
done.
Tue Jul 20 15:03:04 CEST 2010
Tue Jul 20 15:03:04 CEST 2010


synology-dulik login: findhostd uses obsolete (PF_INET,SOCK_PACKET)
synology-dulik login: findhostd uses obsolete (PF_INET,SOCK_PACKET)

Aktuální verze z 20. 7. 2010, 13:02


U-Boot 1.3.3 (Oct 27 2009 - 11:23:00)
CPU:   8533, Version: 1.1, (0x80340011)
Core:  E500, Version: 2.2, (0x80210022)
Clock Configuration:
       CPU:1067 MHz, CCB: 534 MHz,
       DDR: 267 MHz (534 MT/s data rate), LBC:  33 MHz
L1:    D-cache 32 kB enabled
       I-cache 32 kB enabled
I2C:   ready
DRAM:  Initializing
    DDR: 1024 MB
FLASH:  4 MB
L2 cache 256KB: enabled
Using default environment
In:    serial
Out:   serial
Err:   serial
CPLD revision: 1.0
Synology Model: DS-509+
DRAM Type: DIMM
Fan Status: Good
Net:   eTSEC0 [PRIME], eTSEC2
eTSEC0 in Reduce mode
eTSEC2 in Reduce mode
Press Ctrl+C to abort autoboot in 2 second
## Booting image at ffc00000 ...
   Image Name:   Linux-2.6.24
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    2011556 Bytes =  1.9 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
## Loading RAMDisk Image at ffe00000 ...
   Image Name:   synology_ppc853x_509+ 1157
   Image Type:   PowerPC Linux RAMDisk Image (gzip compressed)
   Data Size:    967120 Bytes = 944.5 kB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Booting using the fdt at 0xfff90000
   Loading Ramdisk to 3feb1000, end 3ff9d1d0 ... OK
   Loading Device Tree to 007fa000, end 007fcfff ... OK
Using MPC8544 DS machine description
Memory CAM mapping: CAM0=256Mb, CAM1=256Mb, CAM2=256Mb, CAM3=256Mb, residual: 0Mb
Linux version 2.6.24 (root@image13) (gcc version 3.4.3 20041021 (prerelease)) #1157 Mon Apr 19 21:31:45 CST 2010
Synology Hardware Version: DS509p-j
Found initrd at 0xdfeb1000:0xdff9d1d0
Found FSL PCI host bridge at 0x00000000e0008000.Firmware bus number: 0->255
Found FSL PCI host bridge at 0x00000000e000a000.Firmware bus number: 0->255
Found FSL PCI host bridge at 0x00000000e0009000.Firmware bus number: 0->255
MPC85xx DS board from Freescale Semiconductor
Zone PFN ranges:
  DMA             0 ->   262144
  Normal     262144 ->   262144
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0:        0 ->   262144
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260096
Kernel command line: console=ttyS0,115200 ip=off initrd=0x00800000,4M root=/dev/md0 rw syno_hw_version=DS509p ihd_num=0
mpic: Setting up MPIC " OpenPIC  " version 1.2 at e0040000, max 1 CPUs
mpic: ISU size: 80, shift: 7, mask: 7f
mpic: Initializing for 80 sources
PID hash table entries: 4096 (order: 12, 16384 bytes)
clocksource: timebase mult[3c01894] shift[22] registered
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1033856k/1048576k available (3888k kernel code, 14396k reserved, 136k data, 371k bss, 160k init)
Mount-cache hash table entries: 512
net_namespace: 64 bytes
xor: measuring software checksum speed
   8regs     :  1244.000 MB/sec
   8regs_prefetch:  1080.000 MB/sec
   32regs    :  1336.000 MB/sec
   32regs_prefetch:  1188.000 MB/sec
xor: using function: 32regs (1336.000 MB/sec)
NET: Registered protocol family 16
rstcr compatible register does not exist!
PCI: Probing PCI hardware
PCI: 0001:01:00.0: class b20 doesn't match header type 01. Ignoring class.
PCI: Transparent bridge - 0001:01:00.0
PCI: 0002:03:00.0: class b20 doesn't match header type 01. Ignoring class.
PCI: Transparent bridge - 0002:03:00.0
SCSI subsystem initialized
NET: Registered protocol family 2
Time: timebase clocksource has been installed.
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 944k freed
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
async_tx: api initialized (async)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Serial: 8250/16550 driver $Revision: 1.5 $ 4 ports, IRQ sharing enabled
serial8250.0: ttyS0 at MMIO 0xe0004500 (irq = 42) is a 16550A
console [ttyS0] enabled
serial8250.0: ttyS1 at MMIO 0xe0004600 (irq = 42) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
loop: module loaded
e1000e: Intel(R) PRO/1000 Network Driver - 0.2.0
e1000e: Copyright (c) 1999-2007 Intel Corporation.
Gianfar MII Bus: probed
eth0: Gianfar Ethernet Controller Version 1.3-skbr, 00:00:00:00:00:00
GFAR: SKB Handler initialized at CPU#0(max=128)
eth0: MTU = 1500 (frame size=1514, truesize=1800)
eth0: Running with NAPI enabled
eth0: 64/64 RX/TX BD ring size
eth1: Gianfar Ethernet Controller Version 1.3-skbr, 00:00:00:00:00:00
GFAR: SKB Handler initialized at CPU#0(max=128)
eth1: MTU = 1500 (frame size=1514, truesize=1800)
eth1: Running with NAPI enabled
eth1: 64/64 RX/TX BD ring size
patch with: gianfar: Fix skb allocation strategy
Driver 'sd' needs updating - please use bus_type methods
scsi0 : Marvell SCSI to SATA adapter
scsi1 : Marvell SCSI to SATA adapter
scsi2 : Marvell SCSI to SATA adapter
scsi3 : Marvell SCSI to SATA adapter
scsi 3:0:0:0: Direct-Access     Seagate  ST31000528AS     CC38 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdd] 1953525168 512-byte hardware sectors (1000205 MB)
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 3:0:0:0: [sdd] 1953525168 512-byte hardware sectors (1000205 MB)
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
 sdd: sdd1 sdd2
sd 3:0:0:0: [sdd] Attached SCSI disk
scsi4 : sata_sil24
scsi5 : sata_sil24
ata1: SATA max UDMA/100 host m128@0x80000000 port 0x80004000 irq 16
ata2: SATA max UDMA/100 host m128@0x80000000 port 0x80006000 irq 16
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
ata1.00: ATA-8: ST31000528AS, CC38, max UDMA/133
ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/100
ata2: SATA link down (SStatus 0 SControl 0)
scsi 4:0:0:0: Direct-Access     ATA      ST31000528AS     CC38 PQ: 0 ANSI: 5
sd 4:0:0:0: [sde] 1953525168 512-byte hardware sectors (1000205 MB)
sd 4:0:0:0: [sde] Write Protect is off
sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sde] 1953525168 512-byte hardware sectors (1000205 MB)
sd 4:0:0:0: [sde] Write Protect is off
sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sde: sde1 sde2
sd 4:0:0:0: [sde] Attached SCSI disk
physmap platform flash device: 00400000 at ffc00000
SYNOMTD-0: Found 1 x8 devices at 0x0 in 8-bit bank
 Amd/Fujitsu Extended Query Table at 0x0040
SYNOMTD-0: Swapping erase regions for broken CFI table.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Searching for RedBoot partition table in SYNOMTD-0 at offset 0x3b0000
6 RedBoot partitions found on MTD device SYNOMTD-0
SYNOMTD flash bank 0: Using RedBoot partition definition
Creating 6 MTD partitions on "SYNOMTD-0":
0x003c0000-0x00400000 : "RedBoot"
0x00000000-0x00200000 : "zImage"
0x00200000-0x00380000 : "rd.gz"
0x00380000-0x00390000 : "vendor"
Serial Number: 9BFDN00719
0x00390000-0x003b0000 : "RedBoot Config"
0x003b0000-0x003c0000 : "FIS directory"
i2c /dev entries driver
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
raid6: int32x1    164 MB/s
raid6: int32x2    285 MB/s
raid6: int32x4    375 MB/s
raid6: int32x8    300 MB/s
raid6: using algorithm int32x4 (375 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
t23xrm: no compatible entry in device tree, exiting
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
md: Autodetecting RAID arrays.
md: Scanned 4 and added 4 devices.
md: autorun ...
md: considering sdd1 ...
md:  adding sdd1 ...
md: sdd2 has different UUID to sdd1
md:  adding sde1 ...
md: sde2 has different UUID to sdd1
md: created md0
md: bind<sde1>
md: bind<sdd1>
md: running: <sdd1><sde1>
md: md0: set sdd1 to auto_remap [0]
md: md0: set sde1 to auto_remap [0]
raid1: raid set md0 active with 2 out of 5 mirrors
md: considering sdd2 ...
md:  adding sdd2 ...
md:  adding sde2 ...
md: created md1
md: bind<sde2>
md: bind<sdd2>
md: running: <sdd2><sde2>
md: md1: set sdd2 to auto_remap [0]
md: md1: set sde2 to auto_remap [0]
raid1: raid set md1 active with 2 out of 5 mirrors
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
START /linuxrc.syno
ds508_synobios: module license 'Synology Inc.' taints kernel.
synobios: load, major number 201
Brand: Synology
Model: DS-509+
Starting /usr/syno/bin/synocfgen...
/usr/syno/bin/synocfgen returns 0
synobios: unload
Partition Version=0
Partition layout is not DiskStation style.
NOT EXECUTE /sbin/fsck.ext3.
Mounting /dev/md0 /tmpRoot
kjournald starting.  Commit interval 5 seconds
EXT3 FS on md0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
------------upgrade
use default /dev/md0
Begin upgrade procedure
No upgrade file exists
End upgrade procedure
============upgrade
/dev/md0 /tmpRoot ext3 rw,data=ordered 0 0
none /sys sysfs rw 0 0
linuxrc.syno executed successfully.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on md0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem).
Trying to move old root to /initrd ... okay
Freeing unused kernel memory: 160k init
Starting /etc/rc ...
Mounting proc filesystem...
Check new disk...
Not new disk. Do nothing.
Adding 522040k swap on /dev/md1.  Priority:-1 extents:1 across:522040k
/dev/md0 on / type ext3 (rw,data=ordered)
/tmp on /tmp type tmpfs (rw)
Hostname synology-dulik
195.113.96.122	synology-dulik
169.254.34.204	synology-dulik
Load llc.ko... 
Load psnap.ko... 
Load appletalk.ko... 
NET: Registered protocol family 5
Load fat.ko... 
Load vfat.ko... 
Load ntfs.ko... 
NTFS driver 2.1.29 [Flags: R/O MODULE].
Load sg.ko... 
sd 3:0:0:0: Attached scsi generic sg0 type 0
sd 4:0:0:0: Attached scsi generic sg1 type 0
Load usbcore.ko... 
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Load quota_v2.ko... 
Load soundcore.ko... 
Load snd-page-alloc.ko... 
Load snd.ko... 
Load snd-seq-device.ko... 
Load snd-rawmidi.ko... 
Load snd-usb-lib.ko... 
Load snd-hwdep.ko... 
Load snd-timer.ko... 
Load snd-pcm.ko... 
Load snd-usb-audio.ko... 
usbcore: registered new interface driver snd-usb-audio
Load snd-mixer-oss.ko... 
Load snd-pcm-oss.ko... 
Load slhc.ko... 
Load ppp_generic.ko... 
PPP generic driver version 2.4.2
Load crc-ccitt.ko... 
Load ppp_async.ko... 
Load exportfs.ko... 
Load nfsd.ko... 
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Load fuse.ko... 
fuse init (API version 7.9)
Load zlib_inflate.ko... 
Load udf.ko... 
Load isofs.ko... 
Load ecryptfs.ko... 
encryptfs using the OCF package.
Mounting sysfs...
Mounting usbfs...
Load synobios....
synobios: load, major number 201
Brand: Synology
Model: DS-509+
mknod: synobios: File exists
dhcpcd[1904]: dhcpReboot: do not want cache


dhcpcd[1911]: dhcpReboot: do not want cache


eth0      Link encap:Ethernet  HWaddr 00:11:32:05:AF:06  
          inet addr:169.254.163.109  Bcast:169.254.255.255  Mask:255.255.0.0
          UP BROADCAST NOTRAILERS MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:1
          TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:890 (890.0 B)
          Base address:0x6000 
eth1      Link encap:Ethernet  HWaddr 00:11:32:05:AF:07  
          inet addr:169.254.209.121  Bcast:169.254.255.255  Mask:255.255.0.0
          UP BROADCAST NOTRAILERS RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:890 (890.0 B)
          Base address:0x8000 
lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
Add default router 195.113.96.1
ip: RTNETLINK answers: Network is unreachable
kernel.panic = 3
Starting syslogd...
Pass s00_synocheckfstab ...
Pass CheckSynoinfo ...
Pass CheckUser
Pass CheckSmbConf ...
Pass CheckCronTab ...
Pass CheckGroup.
Pass s62_synocheckapple ...
Checking and Mounting filesystem(s) ...
start findhostd
synokerneltz: set kernel time zone to -60
kernel.core_pattern = /volume1/@%e.core
fs.suid_dumpable = 2
vm.min_free_kbytes = 8192
Starting scemd ...
PHY: e0024520:01 - Link is Up - 1000/Full
ata1.00: configured for UDMA/100
ata1: EH complete
sd 4:0:0:0: [sde] 1953525168 512-byte hardware sectors (1000205 MB)
sd 4:0:0:0: [sde] Write Protect is off
sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
No rules exists, remove firewall modules...
Firewall modules has not been started...
Starting Hotplug Handling Daemon ...
 Disk Usage Status: 
    [sdd] [sde] 
 --------------------------------
 [md0]:  [1]   [1]   
 [md1]:  [1]   [1]   
 Partition Layout Version:  
/dev/sdd: [V2] 
/dev/sde: [V2] 
synocheckvolume: Pass 
synocheckshare: Pass SYNOICheckShare()
synocheckshare: Pass SYNOICheckShareExt()
synocheckshare: Pass SYNOICheckServiceLink()
synocheckshare: Pass SYNOICheckAutoDecrypt()
synocheckiscsitrg: Pass 
synobootup: BEGIN
synobootup: END
Starting inetd...
Starting crond...
Starting PostgreSQL...
warning: cannot change to home directory
LOG:  could not create unrecognized address family 10 socket: Address family not supported by protocol
LOG:  database system was shut down at 2010-07-20 15:00:05 CEST
FATAL:  the database system is starting up
LOG:  database system is ready to accept connections
Update blog_config table in blog db where config_id = 0 to test blog db existence
FATAL:  database "blog" does not exist
Update photo log table where log id = 0 to test db existence
warning: cannot change to home directory
UPDATE 0
Update blog_config table in photo db where config_id = 0 to test blog tables existence
warning: cannot change to home directory
UPDATE 0
0
ERROR:  relation "photo_access_right_bak" does not exist
STATEMENT:  ALTER TABLE photo_access_right_bak OWNER TO admin;
photo_access_right_bak check OK.
ERROR:  relation "photo_comment_bak" does not exist
STATEMENT:  ALTER TABLE photo_comment_bak OWNER TO admin;
photo_comment_bak check OK.
ERROR:  relation "photo_config_bak" does not exist
STATEMENT:  ALTER TABLE photo_config_bak OWNER TO admin;
photo_config_bak check OK.
ERROR:  relation "photo_image_bak" does not exist
STATEMENT:  ALTER TABLE photo_image_bak OWNER TO admin;
photo_image_bak check OK.
ERROR:  relation "photo_log_bak" does not exist
STATEMENT:  ALTER TABLE photo_log_bak OWNER TO admin;
photo_log_bak check OK.
ERROR:  relation "photo_share_bak" does not exist
STATEMENT:  ALTER TABLE photo_share_bak OWNER TO admin;
photo_share_bak check OK.
ERROR:  relation "photo_upload_right_bak" does not exist
STATEMENT:  ALTER TABLE photo_upload_right_bak OWNER TO admin;
photo_upload_right_bak check OK.
ERROR:  relation "photo_user_bak" does not exist
STATEMENT:  ALTER TABLE photo_user_bak OWNER TO admin;
photo_user_bak check OK.
ERROR:  relation "video_comment_bak" does not exist
STATEMENT:  ALTER TABLE video_comment_bak OWNER TO admin;
video_comment_bak check OK.
ERROR:  relation "video_desc_bak" does not exist
STATEMENT:  ALTER TABLE video_desc_bak OWNER TO admin;
video_desc_bak check OK.
Update photoImage table to test new table existence
warning: cannot change to home directory
UPDATE 0
Update email in photo_user table to test email existence
warning: cannot change to home directory
UPDATE 0
Update version in photo_image table to test version existence
warning: cannot change to home directory
UPDATE 0
Update photo_config table in photo db where config_id = 0 to test photo_config table existence
warning: cannot change to home directory
UPDATE 0
Update is_subdir in photo_share table to test new columns existence
warning: cannot change to home directory
UPDATE 0
Update photo_upload_right table in photo db to test photo_upload_right table existence.
Update media type table where type id = 0 to test db existence
warning: cannot change to home directory
 ?column? 
----------
(0 rows)
MySQL is not enabled. Skip...
Checking synolog database existence...
warning: cannot change to home directory
Checking synolog webfmxfer table existence...
warning: cannot change to home directory
Checking if need to run synologd...
No need to start synologd...
Download hasn't set its' volume, let user to choose...
warning: cannot change to home directory
 ?column? 
----------
(0 rows)
Update download queue table and set all pid to -1
warning: cannot change to home directory
UPDATE 0
Update upload_rate in download_queue table to test upload_rate
warning: cannot change to home directory
UPDATE 0
Update seeders in download_queue table to test seeders/leechers
warning: cannot change to home directory
UPDATE 0
set torrent task_flags in download_queue
warning: cannot change to home directory
UPDATE 0
Check current amule version...
No need to upgrade amule.conf...
warning: cannot change to home directory
UPDATE 0
There is no printer. Skip lpd...
Starting Synology Indexing Daemon ...
No iSCSI devices enabled, skip it... 
#####Remove Temp TDB#####
###Starting nmbd###
##################
 Starting Samba
##################
#####Checking TDB /usr/syno/etc/private/secrets.tdb
backup tdb /usr/syno/etc/private/secrets.tdb
#####Checking TDB /var/run/account_policy.tdb
backup tdb /var/run/account_policy.tdb
#####Checking TDB /var/run/group_mapping.tdb
#####Checking TDB /var/run/ntdrivers.tdb
backup tdb /var/run/ntdrivers.tdb
#####Checking TDB /var/run/ntforms.tdb
backup tdb /var/run/ntforms.tdb
#####Checking TDB /var/run/ntprinters.tdb
backup tdb /var/run/ntprinters.tdb
#####Checking TDB /var/run/share_info.tdb
#####Checking TDB /var/run/registry.tdb
backup tdb /var/run/registry.tdb
Load ehci-hcd.ko... 
ehci_hcd 0000:00:0e.1: EHCI Host Controller
ehci_hcd 0000:00:0e.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0e.1: irq 19, io mem 0xc0001000
ehci_hcd 0000:00:0e.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
Load ohci-hcd.ko... 
ohci_hcd 0000:00:0e.0: OHCI Host Controller
ohci_hcd 0000:00:0e.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:0e.0: irq 19, io mem 0xc0000000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
Load uhci-hcd.ko... 
USB Universal Host Controller Interface driver v3.0
Load usb-storage.ko... 
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
Load usblp.ko... 
usbcore: registered new interface driver usblp
Load input-core.ko... 
Load hid.ko... 
Load usbhid.ko... 
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Local package initialization:startup daemons
.
done.
Tue Jul 20 15:03:04 CEST 2010
synology-dulik login: findhostd uses obsolete (PF_INET,SOCK_PACKET)